Last Updated： Aggregation Period:Jan 07, 2026～Feb 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 07, 2026～Feb 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 07, 2026～Feb 03, 2026
This ranking is based on the number of page views on our site.
1～12 item / All 12 items
RS232C/422/485 signal conversion/extension module
This is a module for converting RS232C to RS422/485, USB to RS232C/422/485, and an RS422/485 repeater. It can be mounted on a panel and DIN rail.
Convert GPS signals into light and extend the GPS signal up to 20 km using optical fiber!
The OpticalZONU's "GPS Signal Fiber Optic Extension Module" converts GPS signals into light using RF over Fiber (RFoF) technology and extends GPS signals through fiber optic cables. It can transmit signals from 20 MHz to 30 GHz, not limited to GPS, and is equipped with fiber optic connectors, RF connectors, and DB9 connectors for both the transmitter and receiver. If the GPS antenna connected to the transmitter fails or if the coaxial cable is cut, the antenna simulation at the signal output connector of the receiver stops, indicating a problem with the GPS antenna system to the GPS receiver (patented by OpticalZonu). Multiple receivers can be connected in a daisy chain to share one GPS antenna and transmitter. It operates on a DC12V power supply and provides power to the GPS antenna. 【Features】 ■ Insulated with fiber optic, effective for lightning protection ■ Maximum extension distance of 20 km ■ Bandwidth of 20 MHz to 3.0 GHz (including all GPS bands L1/L2) *For more details, please download the materials or feel free to contact us.
Convert the LAN cable to a coaxial cable and extend the wiring distance.
■Features The IP coaxial transmission unit (from transmitter to receiver) can be converted to coaxial cable (5C-FB), allowing for extended wiring distances. ◆When powered by PoE (only one camera) NHC-IR20S, NCC-IR20S, NBC-DN20S .......................... Maximum extension of 700m NHC-IR21T, NCC-IR21T, NOC-IR21T, NAC-IR90T .......... Maximum extension of 400m ◆When not powered by PoE (multiple cameras via HUB) For NVR04T-A .......................... Maximum extension of 1,400m for 4 cameras For NVR08T-A/16T-A ................. Maximum extension of 1,400m for 5 cameras For NVR04S-A/08S-A/32S-A ....... Maximum extension of 1,400m for 4 cameras *Only one NAC-IR90T or NPTZ-IR2023S is possible (multiple units not allowed)
Supports PowerOver CameraLink. Remote camera control is possible.
The "CLE-160A TX/RX" is a cable extension unit that enables image transmission and camera control from a distance of up to 300 meters. It converts image data from compatible cameras into optical signals and employs multimode fiber optic cable transmission. Additionally, the jitter cleaner function improves the signal quality of the clock, allowing for stable image data transmission even with cameras that have high clock jitter. 【Features】 ■ Bidirectional communication allows for remote camera control ■ The unit's TX/RX bottom DIP switch allows for switching between PoCL compatible and non-compatible modes ■ Supports clock frequencies of up to 85MHz, among other features *For more details, please download the PDF or feel free to contact us.
Bidirectional communication is possible with a single-core optical fiber.
The "CLE-414B TX/RX" is a cable extension unit that enables image transmission and camera control over a single-core optical fiber cable (multi-mode) at distances of up to 300 meters. It allows image transmission of Base Configuration 85MHz across 4 channels using a single-core optical fiber. Additionally, the transfer mode can be switched between Base 4cH/Medium 2cH via a switch. Please feel free to contact us if you have any requests. 【Features】 ■ Bidirectional communication is possible with a single-core optical fiber ■ Switchable between PoCL/Non-PoCL via a switch, etc. *For more details, please download the PDF or feel free to contact us.
Output extension unit that outputs to up to 8 monitors from a PC located up to 1 km away.
Remote operation of a PC located up to 1 km away via fiber optic cable is possible. It is an output extension unit that supports up to 8 output screens. It can be used for various applications such as information display at airports and stations, financial and securities information display, and information display at cinemas and amusement facilities. It is also ideal when the PC cannot be placed near the monitor or when the noise from the PC is a concern.
Unexpected input anomalies due to environmental factors are securely backed up with the output retention time extension module e-hold.
Features: - Simply connect to the power supply to extend output hold time and maintain output during momentary dips. (Stores energy in the built-in electrolytic capacitor for backup when needed) - Available in two types: one that connects to the power supply output and one that connects to the primary side.
Solutions to the challenges of SPI communication distance and maximum speed.
The Serial Peripheral Interface (SPI) is used as a means of communication between processors and peripheral devices in many applications. SPI was originally designed for short-distance communication between devices on the same board. However, with the development of various SPI devices today, there is an increasing demand for long-distance SPI communication beyond the confines of a single board. - It is a module that converts SPI signals into noise-resistant differential signals to extend communication distances. - It extends the communication data between the controller and the peripheral without altering it, only converting the physical signals. - The extension cable repurposes commercially available DisplayPort cables, making it highly versatile and cost-effective to implement. - The cable also includes a power line, so there is no need to provide a separate power source for the slave device. - In addition to the four SPI signals, one signal line can be used for interrupt requests from the slave to the master. - On the master side, the MISO signal becomes tri-state in response to the input of the CS signal, allowing it to be used in a multi-drop environment.
You can extend the wiring distance.
■Features By installing a transmitter on the network camera side and a receiver on the network recorder side, the wiring distance can be extended. ◆When using PoE power supply The wiring distance between one network camera (900HD series) and the network recorder (HNVR-401/801/1601) can be extended up to 200m. *Not compatible with N-PTZ910HD/930HD ◆When not using PoE power supply (installing multiple cameras on the transmitter side and wiring between the transmitter and receiver with one LAN cable) HNVR-401/801... Up to 600m for 2 cameras, up to 400m for 3 cameras. HNVR-1601... Up to 600m for 4 cameras, up to 400m for 6 cameras. *HNVR401/801 can connect a maximum of 3 cameras, and HNVR1601 can connect a maximum of 6 cameras. *Not compatible with N-PTZ910HD/930HD.
Input interruption, instant input stop or decrease! Reliable backup for input anomalies due to environmental factors, etc.
The "DBM20/ZBM20 series" is a module that allows for extended output hold time and output retention during momentary voltage drops simply by connecting it to a power supply. It stores energy in the built-in electrolytic capacitor of the module and provides backup when needed. Additionally, we offer the "ZBM-AC series," which can also extend output hold time and provide backup during momentary voltage drops by connecting to the primary side of the power supply. 【Features】 ■ Simply connect to the power supply output to enable extended output hold time and backup during momentary voltage drops ■ Extends output hold time during input interruption, momentary stoppage, or voltage drop ■ Provides strong backup for the system ■ Further extends output hold time through parallel connection ■ Maintains output voltage under various conditions *For more details, please refer to the PDF materials or feel free to contact us.
Bidirectional communication is possible with a single-core optical fiber. The phase adjustment function absorbs pixel shifts of Full/Medium signals.
The "CLE-560B TX/RX" is a cable extension unit that also supports PowerOver CameraLink. It converts image data from CameraLink Full/Medium Configuration cameras into optical signals, enabling image transfer and camera control over a single-core optical fiber cable up to 300 meters away. Additionally, it can switch between PoCL and Non-PoCL via software. Please feel free to contact us if you have any requests. 【Features】 - Bidirectional communication is possible with a single-core optical fiber - Supports up to 85MHz, CameraLink Full Configuration Ver2.0 - Switchable between PoCL and Non-PoCL via software, etc. *For more details, please download the PDF or feel free to contact us.
This is a power supply and extension unit for 1CH compatible with PoE/PoE+ network cameras.
■Features ● This is a power supply and extension unit for 1 channel of PoE/PoE+ compatible network cameras. (Can be used as a power supply for PTZ network cameras) ● PoE output power can supply up to 30W. ● Wiring distance can be extended up to 100m. Camera - 100m - NH-PUE220 – 100m – NVR ● Equipped with an operation indicator light. (On when powered, off when not powered) *Please use a LAN cable of category 5e (Cat5e) or higher for connection.
